Sears 40L5200U Flat Panel Television User Manual


 
34
Connecting Your TV
Connecting a digital audio system
4 Press the ( / arrow) buttons to select Digital Output
Format.
5 Press the ( / arrow) buttons to select either Dolby Digital or
PCM, depending on your device, see “Audyssey ABX™” on
page 86.
(Sample Image) Audio Setup screen - Done
6 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset, and then
press the ENTER button.
Some audio systems may not be compatible with Dolby Digital
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some digital
audio sources because of copy restrictions.
NOTE