Filter
Top Products
86
Using the TV’s features
Adjusting the audio
Audyssey ABX™
Audyssey ABX™ technology uses sophisticated driver analysis and
low frequency monitoring to extend the range and bass of small
speakers.
To turn on Audyssey ABX™:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Settings, and the press the ENTER button.
3 Press the ( / arrow) buttons to highlight the Audyssey
ABX™ field.
4 Press the ( / arrow) buttons to select On.
Using Dynamic Volume (Audyssey Dynamic Volume
®
)
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
To turn on Dynamic Volume:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Settings, and then press the ENTER button.
3 Press the ( / arrow) buttons to highlight Dynamic Volume
field.
4 Press the ( / arrow) buttons to select On.
When you use ColorStream
®
HD or Video, switch the AV input
mode appropriately.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
Optical Audio Out terminal (see “Connecting a digital audio
system” on page 33).
To select the optical audio output format:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.