Sears 40L5200U Flat Panel Television User Manual


 
66
Using the TV’s features
Tuning channels using the Channel Browser
5 Press the ( arrow) button to highlight Inputs List, and then
press the ( / arrow) buttons to select On or Off.
6 Press the ( arrow) button to highlight Favorites List, and
then press the ( / arrow) buttons to select On or Off.
7 Press the ( arrow) button to highlight HDMI
®
-CEC List,
and then press the ( / arrow) buttons to select On or Off.
HDMI
®
-CEC List is automatically grayed out and set to Off when
Enable HDMI
®
-CEC is switched to Off. See “Using HDMI®-CEC” on
page 109.
8 To save the new entries, highlight Done, and then press the
ENTER button.
To return to factory defaults, highlight Reset, and then press
the ENTER button.
To open the Channel Browser:
Press BACK CB or NEXT CB arrow buttons on the remote
control.
Press the BACK CB arrow button to surf backward through the
previously tuned channels in the History list, the channels in
the ANT/CABLE channel list, the inputs in the Inputs list, the
favorite channels/inputs in the Favorites list, or the
HDMI
®
-CEC devices in the HDMI
®
-CEC List.
Press the NEXT CB arrow button to surf forward through the
channel History, the ANT/CABLE channel list, the Inputs list,
the favorite channels/inputs in the Favorites list, or the
HDMI
®
-CEC List.
Elements of the Channel Browser
(Sample Illustration) Channel Browser elements
1 Current list (History, ANT/CABLE, Inputs, Favorites, or
HDMI
®
-CEC).
2 Channel or input type.
NOTE