Sharp BD-HP22H Blu-ray Player User Manual


 
Video Connections
Connecting to the Video Jack
You can enjoy the images through the video jack.
This Player
Video equipment with a video jack
NOTE
Connect the Blu-ray disc player to LCD TV
directly. If you play back the image via VCR,
the image may deteriorate due to the copy
guard function.
When you record the programme where
copyright is protected, the copy guard
function is activated automatically; the
programme cannot be recorded correctly.
Also, the playback image via VCR may
deteriorate due to this function. However,
this is not a malfunction. When you
watch the programme where copyright is
protected, we recommend that the Blu-
ray disc player be connected to LCD TV
directly.
17
Connection
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an AV cable (supplied) to the video jacks (1 and 2).
1
2
AV cable (supplied)
1
2
(Yellow)
(Yellow)
TVProjector AV receiver
VCR
Blu-ray Disc
Player
LCD TV
Connect directly
To VIDEO output jack
To VIDEO input jack
After connecting
Connect audio equipment or the audio terminals of the TV. (Pages 18–19)
Yellow
Yellow
Video signal outputs:
576i 50Hz
480i 60Hz
576i: 576 interlace scan
480i: 480 interlace scan