Filter
Top Products
22
Turning the Power On
Turning the power on
Press POWER on the remote control or
on the Player to turn on the power of the
Player.
Entering standby
Press POWER on the remote control or
on the Player to enter standby.
If you press POWER again immediately after
entering standby, the Player may not turn on. If this
happens, wait for 10 seconds or more and then
turn on the power again.
Indicators on the Player
ON indicator
Green on Power on
QUICK indicator
White on When “QUICK START”
is set to “YES” (See
page 36.)
STANDBY indicator
Red blinks Preparing for standby
Red on Standby
BD and DVD/CD mode indicators
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
When you turn on the POWER, the MENU screen
automatically displays for a while.
Press EXIT to erase the display.
•
•
Language Setting
Changing the on-screen
display language
Press SETUP to display the SETUP
MENU screen.
Press a/b/c/d to select “ON
SCREEN LANGUAGE”, then press
ENTER.
DISPLAYS THE TITLE LIST SETTINGS
ON SCREEN LANGUAGE
PICTURE
Press a/b to select the language
you want to display on the screen,
then press ENTER.
ENGLISH
ESPAÑOL
FRANÇAIS
NOTE
To select the DVD disc language, such as subtitle
language, etc., see page 25.
•
1
2
3
Before Starting Playback
POWER
QUICK indicator
DVD/CD mode indicator
BD mode indicator
STANDBY indicator
ON indicator
BD-HP50U_en.indd 22BD-HP50U_en.indd 22 2008/07/17 19:58:052008/07/17 19:58:05