Filter
Top Products
Extras option contains additional functions and
settings:
●
Timer
In this option you can find your saved Timer Instructions.
●
Timer Instructions
All programmed recordings, programmed
reminders and copies are listed in this screen.
Also it is possible to programme new recordings.
•Create newly
Create new timer instruction.
New recording
1 With ▲/▼/◄/► select Cr
eate newly and
press OK.
2 With ▲/▼/◄/► select New r
ecording and
press OK. The function list for recording will
be opened:
● Manual recording:
Programme the recording manually. See page 51.
Extras function
TV menu options
● Current programme:
Record currently watched programme.
Menu item will only be indicated when EPG data
is available for the current station. See page 50.
● Following programme:
Record following programme.
Menu item will only be indicated when EPG data
is available for the current station. See page 50.
● Recording via EPG:
Programme recording of a programme via the
electronic programme guide (EPG). See page
50.
● Open USB REC archive
Opens the USB REC ar
chive. See page 51.
3 With ▲/▼/◄/► select the desired option
and press OK to proceed.
-New copy
Y
ou should copy recordings that you want to save
permanently on an external USB hard disk.
1 With ▲/▼/◄/► select Cr
eate newly and
press OK.
2 With ▲/▼/◄/► select New copy and pr
ess
OK. The function list for USB REC archive
will be opened. See page 49.
3 With ▲/▼/◄/► select the desired option
and press OK to proceed.
-New memo (EPG event)
Y
ou can set a timer as a reminder for programmes
which have not yet started.
1 With ▲/▼/◄/► select Cr
eate newly and
press OK.
2 With ▲/▼/◄/► select New memo and
pr
ess OK. The EPG will be called.
The TV will ask at the beginning of a programme if it
should change the channel accordingly.
-Delete
Use this function in the overview of timer
instructions if you want to delete recordings already
programmed or end a running timer recording.
1 With ▲/▼/◄/► select Delete and pr
ess OK.
2 With ▲/▼ select the timer instruction to be
deleted and pr
ess OK. Ahead of the entry
appears a delete icon .
3 With ▲/▼/◄/► select Confirm delete
option and press OK to delete timer
instructions.
Select Cancel to r
eturn to Timer Instructions.
NOTE
• When you have programmed timer recordings, the TV
can only be switched off in the standby mode.
●
Software
This option allows you to have the TV software version
always updated. You can download new software from
different sources:
●
Software update
●
Via USB
Current software version can be downloaded from
the SHARP Internet site and installed on your TV
using a USB memory.
39