Filter
Top Products
23
Wide mode
You can change the screen size using f (WIDE) on the remote control.
Press f (WIDE) to select the Wide mode.
Each time you press f (WIDE), the mode
changes as follows. You can select the
desired mode.
Panorama
Auto
Normal
Full
Cinema 16:9
Zoom 14:9
NOTE
te:
• WSS (Wide Screen Signalling) information refers to the original wide mode information sent from the broadcasting station.
• When Auto is selected, the Panorama mode is selected automatically in the case WSS information indicates the 4:3 mode.
• Try to set Wide mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS
information, the function will not work even if enabled.
• The Wide mode screen will disappear automatically after 4 seconds.
Description
In this mode the picture is progressively stretched toward each side of the screen.
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
The Wide mode is switched automatically based on WSS (Wide Screen Signalling) informa-
tion
For 4:3 “standard” pictures. A side bar appears on each side.
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may
also see bars on the top and bottom with some programmes.
Selected item
Panorama
Full
Cinema 16:9
Auto
Normal
Zoom 14:9
Panorama
Auto
Full
Cinema 16:9
Normal
Zoom 14:9
Useful features
2
1
lc22aa1m_en_p19_28 04.2.25, 3:11 PM23