Filter
Top Products
26
Perform steps 1 and 2 in [1] Automatic
search to display the “Preset” screen.
Press a/b to select “Manual adjustment”,
and then press ENTER.
Press a/b to select the item, and then press
c/d to make the adjustment. (See the table
below for details.)
• You can also use 0 – 9 to adjust the “Fre-
quency” items.
• To adjust “Name”, first press ENTER to activate
the text input mode. Press c/d to select the
input position and press a/b to select the
desired character. When you finish inputting,
press ENTER to set the name.
Press MENU to exit.
Back
R
End
M
Manual adjustment
Channel [ 1]
Frequency [055.25MHz]
Name [SHARP]
Colour system [ PAL]
Sound system [ B/G]
Skip [ off]
0
Back
R
End
M
Preset
Automatic search
Manual adjustment
Sort
Erase programme range
Enter/Change name
Preset (Continued)
[2] Manual adjustment
Individual settings of programmes can be adjusted.
Adjustment item
Channel
Frequency
Name
Colour system
Sound system
Skip
Description
The channel changes to the higher or lower channel.
Receivable frequencies depending on TV norm, installation
site, and range.
Programme name (up to five characters).
Colour norm
TV norm
Channel numbers with a “(•) (RED)” mark on the left are set to
Skip.
Choice/Value range
0–99
044 – 859 (MHz)
041.10 – 871.10
A – Z, 0 – 9, +, -, ., /, !, _
Auto, PAL, SECAM
N358, N443, PAL60
B/G, I, D/K, M, Auto*
off↔on
NOTE
Note:
• Depending on the settings in the colour system of the channels, switching between channels may be slow. If you want to speed up
channel switching, switch “Auto” in “Colour system” to the current reception system (PAL, SECAM, N358, N443 or PAL60).
Useful features
2
1
3
4
* You can select “Auto” in sound system only during first installation and automatic search.
lc22aa1m_en_p19_28 04.2.25, 3:11 PM26