Sharp LC-26DV24U Flat Panel Television User Manual


 
QUICK REFERENCE
Ifthe remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.
1 Open the battery cover. 2 Insert two "AA" size batteries 3 Close the battery cover.
(supplied with the product).
Place the batteries with their terminals
corresponding to the (+) and (-)
indications inthe battery compartment.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon asthey are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
Ifyou wi!! not be using the remote control unit for an extended period of time, remove batteries from it.
lu _ !l
Remote control 30° 30°
sensor
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the
power on.
5v' E6 II
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
_-9
50QO131A E.indb 9 (#.b_ 3/3/2008 1:43:23PM