Sharp LC-26DV24U Flat Panel Television User Manual


 
Part names
14 15 16
3
4
5
6
8
27
3O
13 3t
When using the remote control unit, point it at the TV/DVD.
(See page 9.)
There is a protective film covering the face of the remote
control. Please remove this film before use.
(_-12
1 POWER: Switch the power on or enters standby mode.
(See page 15.)
2 0-9: Set the channel. (See page 15.)
3 (DOT) / SUBTITLE: To select 4-digit channel number.
(See page 15.) / Set subtitle. (See page 27.)
4 REV : Review playback. (See page 26.)
5 SKIP 14_/_1:Skip chapter to reverse or forward direction.
(See page 26.)
6 STILL/PAUSE: Still picture of DVD / Pause CD sound.
(See page 26.)
7 SETUP/TV MENU: TV mode - Display menu of TV /
DVD mode - Cal! up initial setup mode. (See pages 22,
30.)
8 AITI_I_IENTER: Select a desired item on the screen.
SLOW _ I / I=": Reverse/Forward -slow motion. (See
page 26.)
9 EXIT/CANCEL: Turn off the menu screen / Reset
information inthe menu.
10 PLAY MODE: Select playback mode. (See page 26.)
11 AUDIO: Switch the sound of TV / Change sound track
language. (See pages 16, 27.)
12 RETURN: Turn off the DVD setup menu screen.
13 A-B REPEAT: Repeat playback between A and B. (See
page 26.)
14 DISPLAY: Display the current channel (or input source)
information on the screen. (See page 16.)
15 TV/DVD: Switch between TV/AV and DVD. (See pages
15, 25.)
16 EJECT: Eject the disc. (See page 25.)
17 SLEEP: Allows you to set at!me when the TV/DVD
automatically switches to standby. Each time you press
this button, the remaining time setting switches by 10
minutes up to 2 hours. This display will disappear after
a few seconds, and the sleep timer automatically starts
counting down.
If you want to adjust the sleep timer again, you can
press this button repeatedly then change the time
setting.
Select "Off" by pressing SLEEP repeatedly to cancel
the sleep timer.
The TV/DVD will enter the standby mode when the
remaining time reaches zero.
18 INPUT: Select input source. (See page 14.)
19 VIEW MODE: Select the screen size. (See page 17.)
20 VOL +/-: Set the volume.
To increase the volume, press VOL+.
To decrease the volume, press VOL-.
VOL+/- on the TV/DVD operates the same as VOL+/-
on the remote control unit.
21
22
CH ^Iv : Select the channel. (See page 15.)
MUTE: Mute the sound. "Mute" will be displayed on the
screen, and the sound is silenced. The muting feature
can be released by pressing this button again or one of
the VOL +/- buttons.
23 FWD: Fast forward playback. (See page 26.)
24 PLAY: Playback. (See page 25.)
25 STOP: Stop. (See page 25.)
26 DVD MENU: Display DVD menu.
Press A/T/_/_ to select desired title.
27 TOP MENU: Display title menu.
Press A/T/_/_ to select desired title.
28 ANGLE: Change playback channel. (See page 27.)
29 ZOOM: Zoom. (See page 26.)
30 DIRECT SKIP: Locating desired scene of DVD. (See
page 26.)
31 MARKER: Index (DVD). (See page 27.)
50Q0131A E.indb 12 (#.b_ 3/3/2008 1:43:25PM