Filter
Top Products
TV Menu
-
19
ENGLISH
Features
Press MENU.
Press to select Features, and press OK.
EPG (Electronic Programme Guide)
See page EPG (Electronic Programme Guide).
Sleep Timer
Sleep Timer switches the TV to standby after a defined
period of time.
Preferences
Press MENU.
Press to select Preferences, and press OK.
Preferences
Button Control Lock
Teletext
Auto Wide
4:3 Mode
Auto
Off
On
4:3
OK
HDMI-LINK Setup
OK
DivX® Deactivation
DivX® Registration
HDMI-LINK Setup
HDMI-LINK Setup
Enable HDMI-LINK
Auto Standby
On
Auto Power On
On
On
E Enable HDMI-LINK
• Set to “On” to enable the following HDMI-Link function.
(On, Off)
E Auto Power On
• When set to “On”, powering on or playing from the
HDMI-CEC compliant device will automatically turn
on the TV from its standby mode and switch the input
source to the HDMI port connected with HDMI-CEC
compliant device. (On, Off)
E Auto Standby
• When set to “On”, turning off the TV will automatically
turn off the connected HDMI-CEC compliant device.
(On, Off)
Teletext
You can select Teletext language when the TV receives
Teletext signal broadcast by a TV network. (Auto, LIST)
• See page Teletext.
Button Control Lock
Locks the buttons on the TV except the power switch.
(Off)
Auto Wide
When this television receives a true Wide screen picture
and Auto format is On, it will automatically be displayed
in Wide screen format, irrespective of the television’s
previous setting. (On, Off)
4:3 Mode
Select aspect ratio behavior for Auto mode. When 4:3
is selected, the picture size will follow WSS or Scart
Pin8 Spec. If 16:9 is selected, the picture format will
change to wide screen. (4:3, 16:9)
DivX®
This is the function to confirm your registration code.
You need to register the code at www.divx.com.
1. Press MENU.
2. Press to select “Preferences”, and press
OK.
3. Press to select “DivX® Registration” or
“DivX® Deactivation”, and press
OK.
DivX® Registration
You can find your registration code on this menu. You
need to register the TV at www.divx.com before playing
the DivX® content.
DivX® Deactivation
You can find your deactivation code on this menu. You
need to deactivate the TV at www.divx.com to release
the registration.
SHARP_LE144E_Rev1_GB_English.indd 19SHARP_LE144E_Rev1_GB_English.indd 19 2012/09/13 17:44:072012/09/13 17:44:07