Filter
Top Products
On-Screen Display Menu
Automatically detects a film-based source (originally You can adjust the sound quality to your preference
encoded at 24 frames/second), analyzes it then with the following settings.
recreates each still film frame for high-definition picture
quality.
On: Detects, analyzes, converts film source Example [
(} Audio
Off: Normal viewing mode
L
• "Rim Mode" does not function when you set the "AV Mode"
to "Game",
"Film Mode" is not selectable when channel display shows
an input resolution of 4SOP or 720P.
Produces a clearer video image.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images
Off (2D): For Game Mode
• SD Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome. _:t_?2
Off: Normal color. _/_
Audio menu is grayed out when Output Select is set to
"Variable".
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adiustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of 16.
Max,: 15 through +16
Min.: 16through +15
The range of OPC settings are active only when the OPC is
set to "On"
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot beset to a bigger number
than the maximum setting
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small
1 Press MENU to display the MENU screen, and then
press _/1_- to select "Audio".
5' Press _/_' to select a specific adjustment item.
Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item
Press A/_' (or _/1_-)to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
1_ele
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreaseaudiofrom Decreaseaudiofrom
therightspeaker theleft speaker
For resetting allAudio adjustment items to the factory
preset values, press _,/_' to select "Reset", press ENTER,
press _/_ to select "Yes", and then press ENTER.
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on
Off: No/real sound
Audio menu is grayed out when Output Select is set to
"Variable"
For some discs, setup may be required on your DVD player
Inthis case, please refer to the operation manual of your
DVD player
This function allows you to enjoy bass enhanced sound.
On: Bass Enhancer function is on
Off: No/real sound
Audio menu is grayed out when Output Select is set to
"Variable"
19