Sharp LC-42D62U Flat Panel Television User Manual


 
Supplied accessories
QUICK REFERENCE
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
2
1
3
6
Hex key
Short screw
1 Insert the stand into the openings on the
bottom of the TV.
2 Insert and tighten the 4 long screws into
the 4 holes on the rear of the TV.
Hex key
Long screw
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
Attach the two parts of the stand unit to each
other using the 4 short screws and the hex
key (supplied with the product) as shown.
Confi rm that there are 8 screws (4 short
screws and 4 long screws) supplied with the
TV.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• Always use the AC cord supplied with the TV.
Make sure the following accessories are provided with the product.
Remote control unit
(
g
1)
Page 8
“AAA” size battery
(
g
2)
Page 8
AC cord
(
g
1)
Page 7
Stand unit
(
g
1)
Page 6
Cable Clamp (
g
2)
Cable tie (
g
1)
Page 7
Operation manual
(
g
1)