Filter
Top Products
26
The DVI-I input connector pin
(DVI-I connector with 29 pins)
Power management
The monitor is based on the VESA DPMS and the DVI DMPM standards.
To activate the monitor's Power Management function, both the video card and the computer must
conform to the VESA DPMS standard and the DVI DMPM standard.
DPMS: Display Power Management Signalling
*Not using USB hub
DMPM: Digital Monitor Power Management
*Not using USB hub
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the monitor or PC. It transfers informa-
tion such as degree of resolution between the monitor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect the Plug & Play monitor.
There are many varieties of DDC due to the differences between systems. This monitor works with
DDC2B.
Specifications
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 51W* Yes Yes
STANDBY No Yes
SUSPEND Display off 5W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 51W*
OFF Display off 5W
No. Function No. Function
1 TMDS data 2- 16 Hot plug detection
2 TMDS data 2+ 17 TMDS data 0-
3 TMDS data 2/4 shield 18 TMDS data 0+
4 N.C. 19
TMDS data 0/5 shield
5 N.C. 20 N.C.
6 DDC clock 21 N.C.
7 DDC data 22 TMDS clock shield
8 23 TMDS clock +
9 TMDS data 1- 24 TMDS clock -
10 TMDS data 1+ C1
Analog red image signal
11 TMDS data 1/3 shield C2
Analog green image signal
12 N.C. C3
Analog blue image signal
13 N.C. C4
14 +5V C5 Analog GND
15 GND
Analog vertically synchronised
signal
Analog horizontally synchro-
nised signal