Sharp 25N S100 CRT Television User Manual


 
20
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press
CH UP (
8
)
or
DOWN (
9
)
to move the mark to
STATUS, then press
VOL (+)
or
()
to activate the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
2 Press
MENU
, then INPUT SECRET No. will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
4 Press
MENU
and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 V-CHIP HAS BEEN ACTIVATED will be displayed if you watch
the program with Program Rating data the same as you configured.
NOTE:
•“V-CHIP HAS BEEN ACTIVATED will not be displayed if STATUS is not configured to ON.
2 Press
MENU
, then INPUT SECRET No. will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
, then
V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET
No. is chosen, SECRET No. IS INCORRECT will be displayed.
Input the SECRET No. again in this case.
NOTE:
If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
Parent Control (V-CHIP Operation Continued)
19-25 25&27NS100/180 1.4 6/1/00, 2:09 PM20