Filter
Top Products
FUNCTIONS
–
13
–
EN
SEARCH FUNCTION
Track Search
Using SEARCH MODE
1.
/29
2.
within 30 seconds.
/29
Hint
•
For the discs with less than 10 tracks, press the track number directly.
• +10 button can also bring up the Track Search display.
• For discs with 10 or more but less than 100 tracks, to play a single-
digit track, press 0 first, then the track number (e.g. for track 3,
press 0, 3). To play a double-digit track, press the track number.
• For discs with 100 or more tracks, to play a single or a double-digit
track, press 0 first, then the track number (e.g. for track 3, press 0,
0, 3, and for track 26, press 0, 2, 6). To play a triple-digit track, press
the track number.
• SEARCH MODE dose not work during Programmed or Random
Playback.
Using SKIP H / G
1.
T 1 T 2 T 3 T 4
Current Track
(T)
SKIP H G SKIP
Hint
• SKIP H / G are not available when playback is stopped.
•
Previous tracks cannot search at Random Playback by using
SKIP H.
Title / Chapter Search
Using SEARCH MODE
1.
/12
Press SEARCH MODE once for the Chapter Search.
Press SEARCH MODE twice for the Title Search.
2.
within 30 seconds.
/12
Using SKIP H / G
1.
(If the disc has no chapters.)
C 1C 2C 3C 4
Current Chapter
(C)
or
T 1T 2T 3T 4
Current Title
(T)
SKIP H
SKIP H
G SKIP
G SKIP
Hint
• Depending on the disc being played, this function can also be
performed by directly entering the desired chapter number with
the Number buttons. Refer to the manual accompanying the
disc.
Time Search
1.
1:29:00
TOTAL
Press SEARCH MODE repeatedly until “
” appears.
2.
within 30 seconds.
1:29:00
TOTAL
Hint
• When there is no need to enter a number, “0” appears automati-
cally. For example, “0: 0_: __” appears in the Time Search display if
the total time of the title or track is less than 10 minutes.
• Press CLEAR to erase the incorrect input at step
2
.
MARKER SETUP
This feature allows you to assign a specific point on a disc to be called
back later.
To set a marker
1.
Press
SEARCH MODE
repeatedly until the Marker display appears.
2.
or
3.
To return to the marker later
1.
Press
SEARCH MODE
repeatedly until the Marker display appears.
2.
or
3.
At the desired marker
• Playback will restart from the specific point which you set.
To exit the Marker display
1.
Hint
• The Marker display will disappear in about 30 seconds when there
is no input.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later”, and
then press CLEAR.
• Ejecting the disc or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
• You can mark up to 10 points.
E61U1UD_2.indd 13E61U1UD_2.indd 13 8/8/2005 12:12:51 PM8/8/2005 12:12:51 PM