Filter
Top Products
- 16 -
12. Playing back DVDs, VCDs or S-VCDs
To play back a DVD/VCD/S-VCD with the DVD player...
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the
"SilverCrest" logo on the TV screen
• Open the disc tray on the front panel of the DVD player by pressing the
OPEN/CLOSE button.
OPEN will show in the display on the front panel of the DVD player and
Open will be displayed on the television screen.
• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled
side up.
• Press the
OPEN/CLOSE button again to close the disc tray.
CLOSE will show in the display on the front panel of the DVD player and
Close will be displayed on the television screen.
• The contents of the inserted DVD/VCD/S-VCD will now be loaded; this
may take a few seconds. In the meantime LOADING flashes in the dis-
play on the front panel of the DVD player and Reading... is displayed on
the television screen.
• Playback of the inserted DVD/VCD/S-VCD starts automatically.
Note:
DVDs, VCDs and S-VCDs, that you want to playback with the DVD player possi-
bly have a country code, which is printed on the DVD cover.
The DVD player can only playback DVDs/VCDs/S-VCDs with the country code
2.
If no country code is printed on the cover of a DVD/VCD/S-VCD...
• but instead the symbol , then the DVD/VCD/S-VCD can be
played back with the DVD player
• then the DVD/VCD/S-VCD can possibly not be played back with the DVD
player. You can check this by attempting to play back the DVD.
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents
of the DVD/VCD/S-VCD will not playback immediately, rather first a selec-
tion menu appears on the television screen.
In this event select the menu option which will start the playback of the film
with the control button on the remote control.
To start playback of the film press the
OK button on the remote control or press
the
PLAY/PAUSE button.
Play will be superimposed briefly on the television screen.
In the display on the front panel of the DVD player, the following notices
appear:
With DVDs:
• "DVD"
• the number of the currently playing title and chapter
• the played back so far time of the currently playing DVD in hours,
minutes and seconds
In the case of VCDs/S-VCDs:
• "VCD" or "S-VCD"
• the number of the currently playing title
• the played back so far time of the currently playing VCD/S-VCD in
hours,minutes and seconds
12.1 Features during playback of a DVD, VCD or S-VCD
During the playback of a DVD/VCD/S-VCD you can use the following DVD
player features...
Pause playback
To pause the playback of the inserted DVD/VCD/S-VCD...
• During playback press the
PLAY/PAUSE button.
"" will appear in the display on the front panel of the DVD player and
"Pause" will be displayed on the television screen.
On the television screen you will see a freeze frame of the scene that has just
been halted.
• To continue playback of the film press the
PLAY/PAUSE button.
Stop playback
To stop playback of the film on the inserted DVD/VCD/S-VCD press the
STOP button.
With Resume function
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing
the
STOP button once the DVD player automatically saves the position where
playback was interrupted. This function is called the "resume function". Stop
[Play to continue] will be shown on the television screen. As soon as you press
the
PLAY/PAUSE button again playback will continue from the saved position.
Without Resume function
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing
the
STOP button once and you press the STOP button a second time the saved
position, at which you interrupted the playback, will be cleared. As soon as you
press the
PLAY/PAUSE button again playback of the inserted DVD/VCD/
S-VCD will start from the beginning.
IB_KH6519_20_LB6 04.12.2008 14:41 Uhr Seite 16