Sony 3-213-480-12(1) DVD VCR Combo User Manual


 
DVD Recording
55
The c indicator lights up in the front panel
display, and the recorder is ready to start
recording.
If the c indicator flashes in the front panel
display, check that a recordable disc is
inserted and that there is enough disc space for
the recording.
To stop recording
Press x twice.
Note that it may take a few seconds for the
recorder to stop recording.
If the timer settings overlap
See page 53.
To change or cancel timer recording
See “Changing or Cancelling DVD Timer Settings
(Timer List)” on page 57.
z Hints
You can play the recorded programme by selecting the
programme title in the Title List menu.
You can use the recorder after setting the timer. Just
press )/1 to turn on the recorder. Turn off the recorder
to return it to recording standby before the timer
recording starts.
When the start time and the programme position or
input source to be recorded are the same but the
“Media” setting differs, the programme is recorded to
both the DVD disc and the VHS tape.
You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select “Timer,” and select “Timer - VIDEO Plus+.”
Notes
To record a satellite programme, turn on the satellite
tuner and select the satellite programme you want to
record. Leave the satellite tuner turned on until the
recorder finishes recording. If you connect equipment
with a timer function, you can use the Synchro Rec
function (page 55).
Even when correctly set, the programme may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
Before the timer recording starts, “TIMER REC”
flashes in the front panel display.
The recorder automatically turns off when a timer
recording finishes.
The recorder does not record programmes with Copy-
Never signals. Such recordings stop after a few
seconds.
The beginning of some recordings may not be made
when using the PDC/VPS function.
Recording From Connected
Equipment With a Timer
(Synchro Rec)
You can set the recorder to automatically record
programmes from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 3/DECODER jack on
the rear of the recorder (page 29).
When the connected equipment turns on, the
recorder starts recording a programme from the
LINE 3/DECODER jack.
1 Press DVD to operate the DVD recorder.
2 Insert a recordable disc.
3 Select the line input audio.
Set “Line Audio Input” to “Stereo” or
“Bilingual” in the “Audio” setup (page 106).
+
RW
+
R
-
RWVR
-
RW
Video
-
RVR
-
R
Video
11 22 33
44 55 66
77 88
00
99
M/m/</,,
ENTER
SYNCHRO
REC
x
REC MODE
SYSTEM
MENU
DVD
,continued