Filter
Top Products
70
3 Select “Add,” and press ENTER.
“Start” is selected.
4 Press ENTER at the start point.
You can use H, , ./
> and X to find the point. At the point you
want to select, press H or X, and press
ENTER.
“End” is selected.
5 Press ENTER at the end point.
“Add” is selected.
To reset the start or end point, select “Start” or
“End” and repeat step 4 or 5.
6 Press ENTER.
The display returns to the “Edit Scene”
display.
The selected section is added before the scene
selected in step 2.
To add other scenes, repeat from step 2.
To cancel adding
Select “Cancel,” and press ENTER.
Note
The start and end point of a scene may be different from
what you have set.
Copying a scene (Copy)
You can copy and add a selected scene.
1 Follow steps 1 to 7 of “Editing a Playlist”
(page 67).
The “Edit Scene” display appears.
2 Select the scene you want to copy, and
press ENTER.
3 Select “Copy,” and press ENTER.
4 Select a location to copy to using </,
and press ENTER.
The scene is copied to the selected location.
To copy other scenes, repeat from step 2.
Add
T
00:00:07
Playlist No.01
Scene No.01
Add
Cancel
End 00:00:00
Start 00:00:00
Start
End
03:2502.May.2007
10:10
Add
Scene No.01
T
00:00:10
Playlist No.01
Add
Cancel
End 00:00:00
Start 00:00:10
Start
End
03:25
02.May.2007
10:10
-
RWVR
-
RVR
Edit Scene
10:10
Scene No.02/03
03 00:04:2002 00:00:1001 00:00:34
Check
Erase
Modify
Move
Add
Copy
Playlist No.01
Edit Scene
10:10
Scene No.01/04
04 00:04:20
03 00:00:1002 00:00:3401 00:00:10
Playlist No.01
Check
Erase
Modify
Move
Add
Copy