Filter
Top Products
73
VCR Playback
VCR Playback
Playing a VHS Tape
1 Press VIDEO to operate the VCR.
2 Insert a tape.
Playback starts automatically if you insert a
tape with its safety tab removed.
3 Press H (play).
The front panel display shows the playing
time.
When the tape reaches the end, it will rewind
automatically.
To stop playback
Press x (stop).
To eject the tape
Press Z (eject).
To turn off the power while rewinding (Rewind
Shut Off)
Press "/1 while the tape is rewinding. The power
will turn off but the tape will keep rewinding until
it reaches the end.
To use the time counter
Press CLEAR at the point where you want to find
later. The counter in the front panel display resets
to “0:00:00.”
To search for the 0:00:00 point automatically, see
page 76.
To display the counter on the TV screen, press
DISPLAY.
Notes
• During playback, the VCR automatically detects the
recording system and the recording mode, SP
(Standard Play) or LP (Long Play), from the tape. EP
(Extended Play) mode recordings made on other
equipment will play, but picture quality is not
guaranteed.
• The counter resets to “0:00:00” whenever a tape is
reinserted.
• The counter stops counting when it comes to a portion
with no recording.
• When playback does not start even if you insert a tape
with its safety tab removed, set “VCR Function” –
“Auto Play” to “On” in the “Features” setup
(page 108).
• If you switch to the VCR while playing a disc, DVD
playback stops.
• If you play back a tape in LP or EP mode with the
NTSC system, the sound becomes monaural.
• For simultaneous VHS and DVD operation, see page 9.
11 22 33
44 55 66
77 88
00
99
x
"/1
DISPLAY
CLEAR
H
Z
VIDEO
TRACKING +/–
,continued