Filter
Top Products
126
Aerial Reception
Settings (Digital Tuner)
You can make digital tuner and programme
position settings for the recorder.
Scans available digital channels, and
replaces all the channels already stored in
the channel list with the scanned results.
Select your country/region using </,,
and press ENTER.
The recorder scans available digital channels
and stores them.
To cancel the scan, press SYSTEM MENU
or EXIT.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 126).
b Note
The timer settings for the replaced channels are
deleted.
Scans digital channels and adds found
channels to the channel list.
After the programme positions have been
set, you can change the order of each
programme position in the displayed list.
1 Press M/m to select a programme
position you want to move, and press
ENTER.
• To display other pages, press M/m
repeatedly.
2 Press M/m to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To move other programme positions,
repeat from step 1.
You can skip or lock certain channels.
1 Enter your four-digit password using the
number buttons, and press ENTER.
To set a password, see page 138.
2 Select the programme position you want
to skip or lock using M/m, and press
ENTER.
3 Select an option, and press ENTER.
• To skip the programme position, select
.
• To lock the programme position,
select .
A check mark appears in the check box
next to the selected programme position.
Selects whether to skip radio or data
channels.
Replace Channels
Add New Channels
Channel Sort
Channel Options
Auto Skip
Off No channels are skipped.
Radio Radio channels are skipped.
Data Data channels are skipped.
Radio &
Data
Radio and data channels are
skipped when selecting
channels.