Filter
Top Products
127
Settings and Adjustments
You can check the signal strength and
quality of the channel.
To scan a digital channel, select a channel
using </,, and select “Add New
Channels,” then press ENTER.
Selects whether to supply the power to the
aerial connected to the DIGITAL AERIAL
IN jack.
b Note
If the setting keeps reverting to “Off” even when
“On” or “Auto” is selected or broadcast signals
cannot be received properly, check the
connections and try to reset the setting.
Selects main and sub audio/subtitle
languages or teletext language for bilingual
programmes.
Aerial Reception
Settings (Analog Tuner)
You can make analogue tuner and
programme position settings for the
recorder.
Auto Scan
If you connect a TV to this recorder not
using SMARTLINK, you can preset
programme positions automatically using
“Auto Scan.”
Select your country/region using </,,
and press ENTER.
The programme position order will be set
according to the country/region you set.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 128).
Download from TV
If you connect a TV to this recorder with
SMARTLINK, you can preset programme
positions by downloading from your TV.
For details, refer to the operating
instructions supplied with your TV.
Select your country/region using </,,
and press ENTER.
The tuner preset data will be downloaded
from your TV to this recorder.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 128).
Signal Check
Aerial Power (RDR-HXD795/
HXD895/HXD995/HXD1095
(except models for the UK)
only)
On The power is always supplied
to the aerial connected to the
DIGITAL AERIAL IN jack.
Auto The power is supplied to the
aerial connected to the
DIGITAL AERIAL IN jack
when the recorder is turned
on.
Off
The power is not supplied to
the aerial connected to the
DIGITAL AERIAL IN jack.
D.TV Language
Auto Channel Setting
,continued