Filter
Top Products
31
Displaying Time Data and Other Text Information
Chapter 3 Convenient Functions for Editing Operation
A Time data type
The following time data type indications are displayed.
a) You can switch between TC and VITC using the TC SELECT menu item
(see page 41).
b) “*” is displayed when data cannot be read in correctly.
B Drop frame indication for time code reader (on
DSR-1600A only)
C VITC field indication
D DSR-1600A/1600AP operation mode
Indication Description
CNT Count value of the time counter
TCR Time code data from time code reader
(factory default setting)
UBR User bit data from time code reader
TCR.
Time code data from VITC reader
a)
UBR.
User bit data from VITC reader
a)
T*R
b)
Time code data from time code reader. The
asterisk indicates an interpolation by the time
code reader to make up for the time code
data not correctly read from the tape.
U*R
b)
User bit data from the time code reader. The
asterisk indicates that last data is retained by
the time code reader, as the new data has
not been read correctly from the tape.
. Drop frame mode (factory default setting)
: Non-drop frame mode
(blank) Display fields 1 and 3.
* Display fields 2 and 4.
Display Operation mode
CASSETTE OUT Cassette is not loaded.
THREADING Tape loading
UNTHREADING Tape unloading
STANDBY OFF Standby off mode
T. RELEASE Tape tension released
STOP Stop mode
F. FWD Fast forward mode
REW Rewind mode
PREROLL Preroll mode
PLAY Playback mode (servo unlocked)
PLAY LOCK Playback mode (servo locked)
PLAY-PAUSE Temporary stop of playback
JOG STILL Still picture in jog mode
JOG FWD Jog mode in forward direction
JOG REV Jog mode in reverse direction
SHUTTLE (Speed) Shuttle mode