Filter
Top Products
69
Settings and Adjustments
Aerial Reception
Settings (Channel)
You can make tuner and channel settings for
the recorder.
Presets channels automatically.
1 Select your area using </,, and press
m.
2 Select the channel type you want to
preset using </,, and press m.
3 Set the start/end scan frequency using
</, or the number buttons.
4 Select “Start” using M/m, and press .
The recorder starts scanning the
channels. Scanning may take time
depending on your area or settings.
5 Select “Yes,” and press .
When you select “All” in step 2, the
recorder proceeds to scan analogue
channels.
To cancel scanning
Press O RETURN. When a result display
appears, select “Yes” to save the result.
b
When you set channels using “Auto Channel
Setting,” the timer settings in the Timer List will
be erased.
Presets digital channels on a specific
frequency.
When some digital terrestrial channels
cannot be set using “Auto Channel Setting,”
use this function to set them manually.
1 Set “Channel Number” using </,.
The “Frequency” and “Band width” will
be adjusted accordingly. When you
want to set “Frequency” and “Band
width” manually, select the item using
M/m, and change the settings using </
, or number buttons.
2 Select “Start” using M/m, and press .
The recorder starts scanning the digital
channels.
3 Select “Yes,” and press .
To cancel scanning
Press O RETURN. When a result display
appears, select “Yes” to save the result.
Allows you to disable/enable or arrange the
digital channels.
Select a channel using M/m, and press the
corresponding colour button.
• Green button (“Disable”): Disables the
selected channel. The disabled channel
will not appear on the EPG display and will
be skipped when you press PROG +/–.
Press the red button (“Enable”) to enable
the channel again.
Auto Channel Setting
NSW/ACT Select this when in New
South Wales/Australian
Capital Territory.
VIC Select this when in
Victoria.
QLD Select this when in
Queensland.
SA Select this when in South
Australia.
WA Select this when in
Western Australia.
TAS Select this when in
Tasmania.
NT Select this when in
Northern Territory.
All Scans both digital and
analogue channels.
Digital Scans only digital
channels.
Analog Scans only analogue
channels. When you
select this, go to step 4.
Digital Manual Setting
Digital Channel List
,continued