Sony BDP - S300 Blu-ray Player User Manual


 
18
Step 6: Easy Setup
Follow the steps below to make the minimum number of basic
adjustments for using the player. If you do not complete Easy
Setup, it will appear each time you turn on your player.
Make the settings below in the following order.
a Turn on the TV.
b Press [/1 to turn on the player.
The player turns on after a moment.
c Switch the input selector on your TV so that
the signal from the player appears on your
TV screen.
If the display for OSD language selection does not
appear, select “Start” of “Easy Setup” in “Options”
Setup (page 52).
d Select the OSD language you want to display,
and press ENTER.
This will determine the Audio, Subtitle and BD/
DVD menu languages as well.
e Select “Start,” and press ENTER to start
“Easy Setup.”
If the above display does not appear
Go to step 6. This display appears only when the player is turned
on for the first time.
f Select the video output format for the
connected TV, and press ENTER.
For details about the video output, see page 46.
When using the HDMI OUT jack
Select from “Auto,” “576i/480i,” “576p/480p,”
“720p,” “1080i,” “1080p,” or “Source Direct,”
then go to step 8. “TV Type” in step 7 will be set
to “16:9” (wide screen).
When using the jacks other than the HDMI OUT
jack
Select from “S-Video/Video only,” “576i/480i,”
“576p/480p,” “720p,” “1080i” or “Don’t Know.”
If you select “720p” or “1080i,” go to step 8. “TV
Type” in step 7 will be set to “16:9” (wide
screen).
When turned on for the first time
Wait about 90 seconds before the player turns on and starts
Easy Setup. The start-up time will be much shorter once Easy
Setup is completed.
DIMMER
CLEAR
123
456
78
0
9
DISPLAY
AUDIO SUBTITLE
ANGLE
VIDEO
FORMAT
RED
GREEN
TOP
MENU
SYSTEM
MENU
POP UP/
MENU
RETURN
TV
BLUE
YELLOW
"/1
</M/m/,,
ENTER
Confirm Exit
SYSTEM MENU
Select the on-screen display language. Audio, subtitle and BD/DVD menu
language options will be set to the same language as this.
Language
Easy Setup
English
Français
Deutsch
Italiano
Español
Confirm Exit
SYSTEM MENU
Use to select then press ENTER.
Before using, make some simple
settings for the BD player.
Please use the Initial Setup if you
want to make more detailed settings.
Easy Setup
Start
Cancel
Confirm Exit
SYSTEM MENU
Select [Auto] to automatically match the video output
format with the HDMI-connected TV.
Output Video Format
Easy Setup
Auto
576i/480i
576p/480p
720p
1080i
1080p
Source Direct
Confirm Exit
SYSTEM MENU
Select [Auto] to automatically match the video output
format with the HDMI-connected TV.
Output Video Format
Easy Setup
S-Video/Video only
576i/480i
576p/480p
720p
1080i
Don't Know