Sony BDP-N460 Blu-ray Player User Manual


 
23
Hookups and Settings
Step 3: Inserting the
External Memory
To enjoy additional content (such as
BONUSVIEW/BD-LIVE) on certain Blu-ray
Disc titles, you will need to use external
memory (not supplied).
Insert the external memory device (1 GB or
larger USB flash memory, such as Sony
USM2GL, USM4GL, or USM1GH) into the
EXT slot as your local storage.
b
The BD-LIVE function will not be available even if
you insert the external memory in the USB jack on
the front panel.
Insert the external memory into the EXT
slot as far as it will go.
Check that the EXT indicator lights up in the
front panel display when turning the player
on.
To remove the external memory
1 Press [/1 to turn the player off.
2 Pull out the external memory from the
EXT slot.
b
Insert the external memory straight. If you force
the external memory into the slot, this will cause
damage to both the external memory and the
player.
Keep the external memory away from small
children to prevent them from accidentally
swallowing the external memory.
Do not apply too much pressure to the external
memory in the slot, as it may cause a malfunction.
We recommend use of the Sony USM2GL
available as of April 2009.
Other USB flash devices may support this
function. However we cannot guarantee
compatibility with all USB flash memories.
When inserting a USB flash memory, check the
insertion direction before inserting it.
Depending on the USB flash memory, it may
stick out from the EXT slot. Do not force into the
slot or apply pressure to the protruding portion of
the USB flash memory.
Do not connect anything other than a USB flash
memory to the EXT slot.
To avoid data corruption or damage to the
external memory, turn the player off when
inserting or removing the external memory.
When the EXT indicator does not light up, turn
the player off, remove and re-insert the external
memory, then turn the player on again.
Do not insert the external memory that contains
photo or music files to avoid corrupting the
external memory data.
When re-formatting the USB flash memory, use
FAT16 or FAT32 format.
With the logo side up
Rear of the player
Sony USM2GL
(not supplied)