Filter
Top Products
29
KDL-V32/40A12U
2-629-164-14(1)
Using the Menu
Set Up menu
Starts the “first time operation menu” to tune in all available digital and analogue channels.
Usually, you do not need to do this operation because the channels will have been already
tuned when the TV was first installed (page 13). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels that
have been launched by broadcasters).
1 Press OK to select “Auto Start Up”.
2 Press OK to select “Yes”.
The auto-tune display appears on the screen.
3 Follow steps 1 to 3 of “6: Auto-tuning the TV” (page 13).
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned when
the TV was first installed (page 13). However, this option allows you to repeat the process
(e.g., to retune the TV after moving house, or to search for new channels that have been
launched by broadcasters).
1 Press OK to select “Auto Tuning”.
2 Follow step 1 of “6: Auto-tuning the TV” (page 13).
When all available analogue channels have been tuned, the TV returns to normal
operation.
Changes the order in which the analogue channels are stored on the TV.
1 Press OK to select “Programme Sorting”.
2 Press M/m to select the channel you want to move to a new position,
then press OK.
3 Press M/m to select the new position for your channel, then press OK.
Repeat the procedure in steps 2 and 3 to move other channels if required.
You can select the options listed below on the Set Up
menu. To select options, see “Navigating through
menus” (page 19).
Auto Start Up
Auto Tuning (Analogue mode only)
Programme Sorting (Analogue mode only)
Select: Set: Back:
OK
End:
MENU
Auto Start Up
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
Set Up
Continued
01GB-KLV40XUK.book Page 29 Wednesday, August 31, 2005 4:42 PM