Filter
Top Products
Chapter 1 Overview 19 (GB)
Chapter 1 Overview
5 Tape remaining time indicator
If qREMAIN on the DISPLAY SET menu has been
set to ON, the tape remaining time is displayed.
Note
If the tape has been rewound to the beginning, this
indicator will not show the tape remaining time when
the tape is inserted into the unit. The tape remaining
time is displayed after the tape runs for a while.
6 Search/Index indicator
Displays the search mode. If an index has been
marked, this displays INDEX MARK. If you use the
end search function, this displays END SEARCH.
7 Warning indicators
Displays a warning.
For details on warnings, see “Alarm Messages” on page 94
(GB).
8 PAL (DSR-50)/NTSC (DSR-50P) indicator
DSR-50: Appears for five seconds when you play back
a PAL formatted tape.
DSR-50P: Appears for five seconds when you play
back a NTSC formatted tape.
9 DVCAM/DV indicator
In the EE, recording, and duplicate modes, displays the
DVCAM/DV select switch setting. During playback,
displays the format recorded on the tape.
0 Audio mode indicator
In the EE and recording modes, displays the selected
audio mode in AUDIO MODE on the AUDIO SET
menu. During playback and audio dubbing, displays
the audio mode recorded on the tape. When inputting
signals from the DV IN/OUT connector, displays the
audio mode input from the DV IN/OUT connector.
qa Input signal indicator
Displays the INPUT SELECT selector setting.
qs NS (Non Standard) audio mode indicator
Lights when you play back a tape in the unlock audio
mode or when the unlock mode signal has been input
from the DV IN/OUT connector. Always lights if the
DVCAM/DV select switch has been set to DV and the
unit is in the EE mode.
For details on the unlock mode, see “Compatibility of
DVCAM and DV Format” on page 99 (GB).
qd Program AE indicator
qf White balance indicator
qg Gain indicator
qh Iris indicator
qj Shutter speed indicator
qk SteadyShot indicator
Notes
• Data items qd through qk show the settings (camera
data) of the tape recorded by the camera (DSR-200/
200P, 200A/200AP, PD100/PD100P, PD100A/
PD100AP, PD150/PD150P, etc.). This unit cannot
record camera data.
• Data items qd through qk are displayed only when
DATA CODE on the DISPLAY SET menu has been
set to CAMERA.
For details on DATA CODE, see “DISPLAY SET menu” on
page 84 (GB).
ql Date indicator
Displays the date when the tape was recorded.
w; Time indicator
Displays the time when the tape was recorded.
Note
Data items ql and w; are displayed only when DATA
CODE on the DISPLAY SET menu has been set to
DATE.
wa LCD monitor brightness
This is displayed when you adjust the LCD monitor
brightness by rotating the SEL/PUSH EXEC dial. This
display disappears in one second after you adjust the
brightness. You can adjust the LCD monitor brightness
when you have set the DISPLAY (MENU/TC/
AUDIO) selector to TC and the DISPLAY (LCD OFF/
OFF/ON) selector to OFF or ON.