Filter
Top Products
Chapter 4 Setting the Time Code and Adjusting the Video Signals
Chapter 4 Setting the Time Code and Adjusting the Video Signals 69 (GB)
Adjusting the composite signal level
1 Set the INPUT SELECT selector to S VIDEO or
VIDEO in accordance with the signal to be
adjusted.
2 Stop the unit and set it to the EE mode.
The waveform monitor displays the picture you
selected in step 1.
3 Adjust the luminance level, chrominance level and
hue in INPUT in VIDEO LVL on the VIDEO SET
menu.
LUMINANCE: Adjusts the luminance level.
CHROMA: Adjusts the chrominance level.
HUE: Adjusts the hue. (for DSR-50 only)
For details on “INPUT”, see “VIDEO SET menu” on
page 85 (GB).