Filter
Top Products
15
US
2 Start the supplied DVD Player disc (see page 14 for instructions).
3 On the startup screen, press the ✕ (enter) button.
The Basic Operations screen is displayed.
4 With the Basic Operations screen displayed, press the ✕ button.
The Menu screen is displayed.
5 Select the “Installing DVD Player” option from the Menu screen
and press the ✕ button.
Complete the installation following the on-screen instructions.
Notes
• To view DVD video using the DVD Player installed on a memory card (8MB)
(for PlayStation
®2), you must insert the memory card (8MB) (for
PlayStation
®2) into a MEMORY CARD slot of the PlayStation®2 console.
• Some DVD remote control functions will not work if you use DVD Player
software earlier than version 2.00. Refer to the PlayStation®2 console
instruction manual for details on how to check the version of your DVD Player
software.
For PlayStation
®
2 consoles of model numbers SCPH-30001 and SCPH-35001 GT,
you must install DVD Player (ver 2.00), or later, on a memory card (8MB) (for
PlayStation
®2) to activate all DVD remote control functions.
• Before installing the DVD Player on the memory card (8MB) (for
PlayStation®2), be sure that at least 2,200KB (2.2MB) of free space is available
on the memory card.
• Insert the memory card (8MB) (for PlayStation®2) into MEMORY CARD
slot 1 of the PlayStation
®2 console. Installation is not possible with the memory
card in MEMORY CARD slot 2.
• Do not remove the memory card (8MB) (for PlayStation®2) while the
installation is in progress. The installation will be incomplete if the memory
card is removed or the PlayStation
®2 console is turned off or reset while
installing.