Filter
Top Products
53
US
Notes
• If you set this option to “On,” the language may change because the “Audio Track
Auto Select Mode” setting has higher priority than the “Audio” setting of
“Language Setup” (page 43).
• If the “DTS” option of “Audio Digital Out” is set to “Off” under “Audio Setup,”
the DTS audio track will not be played even if you set “Audio Track Auto Select
Mode” to “On” and the DTS audio track has the highest number of channels.
• If PCM, Dolby Digital, and DTS have the same number of channels, the console
selects PCM, Dolby Digital, and DTS in this order.
• Depending on the DVD, the audio track with priority may be predetermined. In
this case, you cannot give priority to the DTS or Dolby Digital format by selecting
“On.”
x DVD Volume
If the audio output level of the DVD is low, you can turn up the volume of
the DVD. The “DIGITAL OUT (OPTICAL)” option of “Audio Digital
Out” must be set to “Off,” to change the volume.
• +2 : Turns up the volume (maximum).
• +1 : Turns up the volume.
•
Standard : Original audio volume. Normally select this position.
Notes
• Sound clipping may occur in places where loud sound is present. If sound clipping
occurs, select “Standard.”
• If you turn up the volume too high, your ears may be injured or the speakers
damaged.