Filter
Top Products
67
Additional Information
Additional
Information
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
remedy the problem. Should any problem persist, consult
your nearest Sony dealer.
Power
The power is not turned on.
, Check that the mains lead is connected securely.
Picture
There is no picture.
, Check that the player is connected securely.
, The video connecting cord is damaged. Replace it
with a new one.
, Make sure you connect the player to the video
input connector on the TV. (page 8)
, Make sure you turn on the TV.
, Make sure you select the video input on the TV so
that you can view the pictures from the player.
Picture noise appears.
, Clean the disc.
, If the video signal from your player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs could
affect picture quality. If you still experience
problems after checking your connections, please
try connecting your player directly to your TV’s S
video input, if your TV is equipped with this
input. (page 8)
, If the color system of your player does not match
with that of your TV, change the color system of
the player. For details, see page 9. (You cannot
change the color system of the DVD disc itself.)
Even though you set the aspect ratio in “TV
TYPE” in “SCREEN SETUP” of the setup display,
the picture does not fill the screen.
, The aspect ratio is fixed on your DVD.