Filter
Top Products
70
Settings and Adjustments
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the AV receiver (amplifier)
You can change the volume of the AV receiver (amplifier)
using AV VOL.
Notes
• Depending on the AV receiver (amplifier), you may not be able
to control your AV receiver (amplifier).
• You can control the AV receiver (amplifier) regardless of the
position of the TV/DVD switch(except for RMT-D120E).
Notes
• Depending on the TV, you may not be able to control your TV
or to use some of the buttons above.
• If you use number buttons to select the TV’s program position,
press ? followed by the number buttons for two-digit
numbers. (RMT-D120O only)
Controlling AV receivers (amplifiers) with
the remote
(RMT-D120E)
Hold down ?/1, and enter your AV receiver’s
manufacturer’s code (see the table) using the
number buttons.
Then release ?/1.
(RMT-D120A/D120O)
1 Slide the TV/DVD switch to DVD.
2 Hold down ?/1, and enter your AV receiver’s
manufacturer’s code (see the table) using the
number buttons. Then release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
Manufacturer Code number
Sony 91, 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
1
4
7
2
5
8
0
3
6
9
AV VOL
1
4
7
2
5
8
0
3
6
9
1/u
Number
buttons
TV/DVD
switch
Controlling Your TV or AV Receiver (Amplifier) with the Supplied Remote
1
4
7
2
5
8
0
3
6
9
1/u
Number
buttons