Filter
Top Products
1-3
BKDW-515
Sub panel cover
Screw
(BVTT3x6)
Screw
(BVTT3x6)
1-4. Installation of Sub Panel Cover and
Switch Cover
1. Install the sub panel cover supplied with BKDW-515
to sub control panel.
2. Install the switch cover supplied with BKDW-515 to
system set-up panel.
1-5. Installation of Control Panel
1. Fix the both arms at 45 degrees.
2. Connect the harness of the control panel to the connec-
tor (CN580) on the system set-up panel.
3. Set the notches of the control panel to the claws of the
arms, and push the control panel until making a click
sound.
n
Push the head of the two screws when the hook does
not move smoothly and when the panel is difficult to
attach. This facilitates the attaching.
4. Then tighten the two screws.
1-4. Installation of Sub Panel Cover and Switch Cover
1-5. Installation of Control Panel
Switch cover
Screw
(BVTT3x6)
Screw
(BVTT3x6)
CN580
Notches
Control panel
Screw
(B3x12)
Claws
Claws
Notches