Filter
Top Products
3-3
BKDW-515
ITEM DATA Description
No. ITEM No. DATA
F20 CONFI LED 0 switch The condition to light CONFI LED on the control panel is selected.
STATUS 1 status 0: CONFI LED lights on when CONFI switch is set to ON.
1: CONFI LED lights on when playing back with CONFI head. Note that CONFI
. CP ROM LED indicates the switch status only during the CONFI switch is pressed.
version 1.10
and higher
F21 PROCESS 0 off In case that LOCAL DISABLE command is effective via the 9pin REMOTE, or “all
CONT VR 1 on disable” is selected in Setup 006: LOCAL FUNCTION ENABLE, the availability of
LOCAL PROCESS CONT VR on the subcontrol panel is selected.
ENABLE 0: Process control is invalid.
1: Process control is active.
. CP ROM
version 1.10
and higher
F22 AUDIO ONLY 0 off The unit directly goes into digital audio edit mode from playback mode by AUDIO
REC 1 momentary EDIT PRESET key.
2 toggle 0: Does not go into Edit mode by AUDIO EDIT PRESET key.
1: Audio editing is available while AUDIO EDIT PRESET key is pressed.
. CP ROM 2: Audio editing is available when AUDIO EDIT PRESET key is pressed once.
version 1.10 When pressing once more, it returns to PLAY mode.
and higher
F23 A/V INPUT 0 off Audio/Video Input Select switch can be invalid during REC mode.
SELECT 1 on 0: Audio/Video Input Select switch is active in REC mode.
INHIBIT 1: Audio/Video Input Select switch is invalid in REC mode.
If Item-21 is set to ON, Audio/Video Input Select switch is active even if “1” (on) is
. CP ROM selected in this menu.
version 1.10
and higher
F24 MAXIMUM 0 x50 Maximum speed of digital tape is limited in search mode.
(PAL) DIGITAL TAPE 1 x42 0: 50 times speed in FF, REW, and SHUTTLE mode
SPEED 2 x42/x24 1: 42 times speed in FF, REW, and SHUTTLE mode
. CP ROM 3 x24 2: 42 times speed in FF and REW mode, and 24 times speed in SHUTTLE mode
version 1.10 3: 24 times speed in FF, REW, and SHUTTLE mode
and higher
F24 MAXIMUM 0 x50 Maximum speed of digital tape is limited in search mode.
(NTSC)DIGITAL TAPE 1 x35 0: 50 times speed in FF, REW, and SHUTTLE mode
SPEED 2 x35/x24 1: 35 times speed in FF, REW, and SHUTTLE mode
. CP ROM 3 x24 2: 35 times speed in FF and REW mode, and 24 times speed in SHUTTLE mode
version 1.10 3: 24 times speed in FF, REW, and SHUTTLE mode
and higher
F25 SERVO/AV REF 0 off Servo Reference in PREREAD mode is specified.
SEL IN PRE- 1 on 0: It works according to the setting of Item-309.
READ MODE 1: EXT REF VIDEO is selected.
. CP ROM
version 1.10
and higher
F26 DIGITAL AUDIO 0 off The condition for MUTE of Digital Audio when playing back in Search mode is
MUTE IN 1 on selected.
SEARCH MODE 0: It works according to the setting of Item-802.
. CP ROM 1: Mute is applicable in the modes except PLAY and EE.
version 1.10
and higher
3-1. ITEM-F Series