Filter
Top Products
4-1 Registering and Storing Menu Settings
4-6 Chapter 4 Menu Settings
Chapter 4 Menu Settings
7 Press the [F10] (EXIT) button.
The SET UP menu appears again.
4-1-5 IC Memory Card Function
You can store menu settings in the VTR memory
banks and cue point data to an IC memory card for
later recalling.
The MEMORY CARD indicator lights up when you
insert an IC memory card.
You can then access the MEMORY CARD menu
directly from other menus (HOME/TC/CUE/PF1/PF2)
by pressing the ACCESS button.
IC memory card function
To eject the IC memory card
Press the button to the right of the insertion slot.
Notes
• Insert the IC memory card fully until it clicks.
• The ACCESS button flashes while the VTR is
writing to or reading from an IC memory card. Do
not eject the IC memory card while the indicator is
flashing.
Formatting an IC memory card
The supplied IC memory card or other IC memory
cards must be formatted before you can use them.
Formatting an IC memory card
1 Insert the IC memory card.
The MEMORY CARD indicator lights up.
2 Press the ACCESS button.
MEMORY CARD menu appears in the display.
3 Press the [F1] (FORMAT CARD) button.
A message asking you to confirm the operation
appears in the display.
4 Press the [F1] (FORMAT CARD) button while
holding down the SFT button.
A message asking you to confirm the operation
appears in the display again.
5 Press the [F1] (FORMAT CARD) button while
holding down the SFT button.
The VTR starts formatting the card.
To cancel formatting
Press the CLR button while the confirmation
message appears in the display.
3,4,5 2
1
BÅSEBÅLL EDIT
MEMORY CÅRD
MEMORY CÅRD VTR BÅNK
SETUP BÅNK1 CURRENT SETUP
TCR 00:00:00:00
0 ç BÅSEBÅLL
BÅSEBÅLL 1 1
(PRESET) 2 2
(PRESET) 3 3 FOOTBÅLL12
4 4 (PRESET)
5 5
6 6 (PRESET)
(PRESET) 7 7
8 8
FORMÅT
CÅRD
SHOW
SETUP
SHOW
CUESET
COPY EXIT
EDIT
TITLE
SELECT
ÅLL
DIREC-
TION
>>
ƒ (PRESET)
...
...
IC Memory card insertion slot
ACCESS button
MEMORY CARD indicator