Sony DVW-500P/1 DVR User Manual


 
5-12 Chapter 5 Recording/Playback
5-4 Playback
Chapter 5 Recording/Playback
$$ $ $ $
To start playback immediately after prerolling
Press the PREVIEW button.
The PREVIEW button lights up. When the tape passes
the speed variation start point, DMC playback starts
and continues at the speed(s) stored in memory. When
the tape passes the speed variation end point, normal-
speed playback resumes.
To stop the tape during DMC playback
Press the STOP button.
To exit DMC playback mode
Press the ALT/[F7] (DMC) button while holding down
the CLR button in HOME menu.
During DMC playback, the tape runs as shown in the
diagram below.
DMC playback
1,2
Performing DMC playback
There are two methods of starting DMC playback.
• Starting playback at the on-air cue from the on-air
start point
Starting playback immediately after prerolling
Notes
To avoid operation errors, we recommend that you
use the VTR alone when performing DMC playback.
• If two VTRs are connected for editing, you can still
perform DMC playback, but only on the recorder
VTR, and only when both the RECORDER and
PLAYER buttons are off.
Performing DMC playback
To start playback at the on-air cue from the
on-air start point
1 Press the REVIEW button.
The REVIEW button lights up and the tape is cued
up to the on-air start point. After the tape is cued
up, the REVIEW button flashes.
2 Press the REVIEW button again at the moment the
on-air cue is given.
The REVIEW button lights up. When the tape
passes the speed variation start point, DMC
playback starts and continues at the speed(s) stored
in memory. When the tape passes the speed
variation end point, normal-speed playback starts
and the tape stops at the on-air end point.
Preroll
point
Speed
variation
start point
Speed
variation
ending
point
Press the REVIEW button.
Press the PREVIEW button.
Normal-
speed
playback
Normal-speed
playback
On-air
start
point
Stop
On-air
end
point
Starting DMC playback at the on-air cue from the on-air start point
Stop
Normal-
speed
playback
DMC playback
Normal-
speed
playback
Press the
REVIEW
button again
at the on-air
cue.
Starting DMC playback immediately after preroll
DMC
playback