Filter
Top Products
12
Advanced Operation - Advanced Presetting
Automatically Tuning the TV using the TV buttons
Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the
instructions below, this TV also searches and stores automatically all available channels using just one button of the TV set.
1 Press the flap on the front of the TV by pressing on the mark to
reveal the front control panel.
2 Press and hold in the button on the TV set for some seconds,
until a menu appears automatically on the screen asking you to
check that antenna is connected.
3 Confirm that the antenna is connected and then press the OK
button.
The automatic tuning starts and the message "Searching..." flashes
on the screen.
This procedure could take some minutes.
When the automatic tuning procedure is complete, the menu disappears
from the TV screen and your TV is now ready for use.
Note: To stop the automatic tuning, press the MENU button on the
remote control.
Advanced Operation - Advanced Presetting
S
RM
887
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K
AUTO PROGRAMME
PROGRAMME:
SYSTEM:
CHANNEL:
Searching...
01
B/G
C 21
Please confirm that
antenna is connected
CONFIRM
Please confirm that
antenna is connected
CONFIRM
Please confirm that
antenna is connected
CONFIRM