Filter
Top Products
2. Press the WPS button on the access point you want to register.
Note
[WPS Push] requires that the security of the access point be WPA or WPA2 and that the
WPS push button method is supported. If the security of your access point is set to WEP
or your access point does not support the WPS push button method, register the access
point manually.
For details on the supported functions and settings for your access point, refer to the
manual of your access point or contact the administrator of your access point.
Depending on the surrounding conditions such as obstacles between this product and
access point, signal condition and the materials of the wall, etc., connections may not be
established or the communication distance may be shorter. Move this product or
decrease the distance between this product and the access point.
[150] How to Use
Menu operations Wireless
Access point settings
You can register your access point manually. Before starting the procedure, check the SSID
name, security mode, and password of the access point. The password may be preset in
some devices. For details, see the access point operating instructions or contact the
administrator.
1. - [Wireless] - [ Setting] - [Access point settings].
2. Select the access point you want to register.
The desired access point is displayed:
Select the access point.
The desired access point is not displayed:
Select [Manual setting], then enter the SSID name of the access point, and then select
the security mode.
3. Enter the password, and then select [Next] - [Register].