Sony Frd-ax30 DVR User Manual


 
Do not hold this product by the following parts, and also do not hold this product by the
jack covers.
A: LCD monitor
B: Built-in USB Cable
C: Viewfinder (models with the viewfinder)
D: Shoe cover
E: Battery pack
Do not aim this product at the sun. Doing so might cause this product to malfunction.
Take images of the sun only in low light conditions, such as at dusk.
Do not use or store this product and accessories in the following locations:
Anywhere extremely hot, cold or humid. Never leave them exposed to temperatures above 60 ˚C
(140 °F), such as under direct sunlight, near heaters or in a car parked in the sun. They may
malfunction or become deformed.
Near strong magnetic fields or mechanical vibration. This product may malfunction.
Near strong radio waves or radiation. This product may not be able to record properly.
Near tuner devices such as TVs or radio. Noise may occur.
On a sandy beach or anywhere dusty. If sand or dust gets in this product, it may malfunction.
Sometimes this malfunction cannot be repaired.
Near windows or outdoors, where the LCD monitor, the viewfinder (models with the viewfinder), or
the lens may be exposed to direct sunlight. This damages the inside of the LCD monitor or the
viewfinder.
For DC or AC operation, use the accessories recommended in these operating
instructions.
Do not let your product get wet, for example, from rain or sea water. If your product gets
wet, it may malfunction. Sometimes this malfunction cannot be repaired.
If any solid object or liquid gets inside the casing, unplug your product and have it
checked by a Sony dealer before operating it any further.
Avoid rough handling, disassembling, modifying, physical shock, or impact such as
hammering, dropping or stepping on the product. Be particularly careful with the lens.
Keep the LCD monitor closed and the viewfinder retracted when you are not using your
product (models with the viewfinder).
Do not operate your product with it wrapped in an object such as a towel.
When disconnecting the cable, pull it by the plug and not the cord.