Sony KDF-55E2000 Flat Panel Television User Manual


 
[] HD/DVD IN 2 Connects to your equipment's component video (YPBPIQ output jacks. Component video
(1080i/720p/ provides better picture quality than the S VIDEO ([_I of rear panel) or the composite video
480p/480i) ([_ of rear panel) connections (see page 19).When Auto is selected for the Video 2
(Component) option in the Setup settings, the component video fimction will be the dethult
stream when present (see page 73).
[] VIDEO IN 2 Connects to the composite video output jack on your camcorder or other video eqnipment.
il_ connecting eomposiie video io viDEoiN 2; sure to Select Video 2
(Component) to Off in the Setup settings to activate both audio and video
function for composite connection (see page 73).
...........
[] AUDIO IN 2 Connects to the audio (L/R) output jacks of your equipment such as camcorder or other video
L (MONO)/N equipment which you want an easy access.
[] VIDEO IN 1 Connects to the S VIDEO outpnt jack of your VCR or other video equipment that has
S VIDEO S VIDEO. S VIDEO provides better picture quality than the composite video ([_]).
[] VHF/UHF RF input that connects to your cable and VHF/UHF antenna signal.
CABLE
[] VIDEO IN 1/3 Connects to the composite video and audio output jacks on your VCR or other video
VIDEO/ equipment. A third composite video and audio (VIDEO 2) is located on the left side panel of
L (MONO)- the TV.
AUDIO-R
[] DIGITAL AUDIO Connects to the optical audio input of a digital audio component that is PCM/Dolby Digital
(OPTICAL) OUT compatible.
PCM/DOLBY*
DIGITAL
[] HDMI IN6 HDMI (High-DefinitionMultimedia Interface) provides an uncompressed, all-digital
HDMI/ audio/video interface between this TV and any HDMI-eqnipped audio/video equipment, such
R-AUDIO-L as a set-top box, Blu-ray Disc player, DVD player, A/V receiver as well as PC. HDMI supports
enhanced, or high-definition video, plus two-channel digital audio. You can also connect a
DVI-equipped device to your TV by using an HDMI-to-DVI cable.
[] HDMI IN 7 When HDMI to DVI cable is used to connect your equipment for video, be sure to use audio
cable I_r the sound. See page 35 l\_r connecting to your personal computer.
[] Service Port For service use only.
[] AUDIO OUT Connects to the left and right audio input jacks of your audio or video equipment. Yon can use
(VAR/FIX) L/R these outputs to listen to your TV's audio through your stereo system.
[] HD/DVD IN 4/5 Connects to your equipment's component video (YPI3PIQ and audio (L/R)jacks. Component
(1080i/720p/ video provides better pictnre quality than the S VIDEO ([]) or the composite video ([])
480p/480i)/ connections.
L-AUDIO-R
* Manulactured under license from Dolby Laboratories. "Dolby" mid the double-D symbol are trademarks ol Dolby Laboratories.
5"
"-.I
19