Sony KDL-32R400A Flat Panel Television User Manual


 
58
Blurry picture / Poor color Transporting the TV from a cold to a warm location or a sudden
change in room temperature may cause moisture condensation,
resulting in a blurry picture or poor color. Turn off your TV and
wait a few hours before powering on again.
No sound / Noisy sound
No sound but good
picture
Check the volume control.
•Press MUTING or VOL + so that “Muting” disappears from the
screen (see pages 23 and 24).
•Set Speakers to TV Speakers in the Sound settings (see page
39). If it is set to Audio System, sound is not output from the TV’s
speakers regardless of the TV’s volume control.
When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not provide an audio
signal.
When tuned to a digital channel with Alternate Audio, the
broadcaster may not be broadcasting your preferred Alternate
Audio language. Press OPTIONS, highlight and select Alternate
Audio, and change the Alternate Audio language (see page
39).
Audio noise Make sure that the antenna is connected using a 75-ohm coaxial
cable (not supplied).
Keep the antenna cable away from other connecting cords.
To avoid TV interference, make sure to use an undamaged
antenna cable.
No audio or low audio
with Home Theater
System
•Set Speakers to Audio System in the Sound settings (see page
39).
•Set Audio Out to Fixed in the Sound settings (see page 39).
No color / Irregular
picture
Verify that the Video/Component Selection (see page 49) is set
to the current input type in use. We suggest leaving this setting to
Auto.
BRAVIA Sync
Cannot find connected
BRAVIA Sync HDMI
device
Make sure that the BRAVIA Sync Control is set up on both the
TV and the optional device compatible with BRAVIA Sync (see
page 27).
Second A/V receiver is
not listed on the BRAVIA
Sync Device List
Only one A/V receiver may be used with the BRAVIA Sync and
BRAVIA Sync Control functions at one time (see page 50).
Condition Explanation/Solution