Sony KDL-32R400A Flat Panel Television User Manual


 
9
Getting Started
Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
This TV is very heavy, so two people should place the TV onto thick and soft cloth.
If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).
Be sure to securely tighten the supplied screws, otherwise the TV may fall down.
Use an appropriate screwdriver to attach the screws tightly without damaging the screw head.
Please ensure the AC power cord is away from the Table-Top Stand installation location when
you attach the Table-Top Stand.
When detaching the Table-Top Stand, reverse the attaching procedure. Do not remove any
screws other than those used when attaching the Table-Top Stand. Do not power on the TV with
its LCD panel facing down to avoid uneven picture uniformity.