Filter
Top Products
Using MENU Functions
23
GB
Set-up menu
Timer
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into
standby mode.
When the Sleep Timer is activated, the (Timer) indicator on the TV (front)
lights up in orange.
z
• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “Sleep timer will end soon. Power will be turned off” appears on the screen one minute
before the TV switches to standby mode.
Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital
channels, the clock cannot be adjusted manually since it is set to the time code
of the broadcasted signal.
Timer
Sets the timer to turn on/off the TV.
“Timer Mode”: Selects the desired period.
“On Time”: Sets the time to turn on the TV.
“Off Time”: Sets the time to turn off the TV.
~
If the TV is unplugged or there is a power cut, some programmed events may be cancelled.
Auto Start Up
Starts the “first time operation menu” to select the language, country/region and
location, and tune in all available digital and analogue channels. Usually, you do
not need to do this operation because the language and country/region will have
been selected and channels already tuned when the TV was first installed
(page 6). However, this option allows you to repeat the process (e.g., to retune
the TV after moving house, or to search for new channels that have been
launched by broadcasters).
Language
Selects the language in which the menus are displayed.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already
tuned when the TV was first installed (page 6). However, this option allows you
to repeat the process (e.g., to retune the TV after moving house, or to search for
new channels that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
1 Press
F/f to select the channel you want to move to a new position, then
press
g.
2 Press
F/f to select the new position for your channel, then press .
Continued
010COV.book Page 23 Friday, July 4, 2008 12:56 PM