Filter
Top Products
– 15 –
WA1
RM-Y1108
Connecting a VCR
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual on page 14.
Connecting a VCR or a DVD recorder that supports SmartLink
SmartLink is a direct link between the TV set and a SmartLink compatible VCR/DVD recorder. For more
information on SmartLink, please refer to the instruction manual of your SmartLink VCR/DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD recorder to the
TV using a Scart lead to the Scart 2/
F.
If you have connected a decoder or a Set Top Box to the Scart 2/ F or through a
VCR connected to this Scart
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option,
select “On” (refer to page 26). Repeat this option for each scrambled signal.
**This option is only available depending on the country you have selected in the “Country” menu.
Connecting Audio Equipment to the TV
To listen to the sound from TV on Hi-fi equipment.
Connect your audio equipment to the audio output sockets E if you wish to amplify the audio output from the TV.
Next, using the menu system, select the “Features” menu and set the “TV Speakers” to "Permanent Off" (see page
22).
The volume of the external speakers can be altered by pressing the volume buttons on the TV remote control.
The treble and bass setting can also be altered through the “Sound Adjustment” menu (see page 20).
S
S
Viewing pictures from equipment connected to the TV
1 Connect your equipment to the designated TV socket, as indicated on page 29.
2 Switch on the connected equipment.
3 To watch the picture from the connected equipment, press the / button repeatedly until
the correct input symbol appears on the screen.
Symbol Input Signals
1 Audio / video input signal through the Scart connector G
1 RGB input signal through the Scart connector G. This symbol appears only if
an RGB source has been connected.
2 Audio/video input signal through the Scart connector F.
2 S Video Input signal through the Scart connector F. This symbol appears only
if an S Video source has been connected.
3 Video input signal through the phono socket B and Audio input signal through
C.
3 S Video Input signal through the side S Video input jack A and Audio signal
through C. This symbol appears only if an S Video source has been connected.
4 Press the button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select 3 or 3
input signal using the instructions above. Next, refer to the “Sound Adjustment” section of this
manual and set “Dual Sound” option to “A” on the sound menu screen (see page 20).
S
S
S