Filter
Top Products
– 8 –
WA1
RM-Y1108
5
The Auto Tuning menu appears on the screen. Press the OK
button to select Yes.
6
The TV starts to automatically search and store all
available broadcast channels for you.
This procedure could take some minutes. Please be patient
and do not press any buttons, otherwise automatic tuning
will not be completed.
If no channels were found during the auto tune process, a
message appears automatically on the screen asking you to
connect the aerial. Check the aerial connection (refer to
page 14). Press the
OK button to restart the auto tuning
process.
7
After all available channels are captured and stored,
the Programme Sorting menu automatically appears
on the screen enabling you to change the order in
which the channels are stored.
a) If you wish to keep the broadcast channels in the tuned order,
go to step 8.
b) If you wish to store the channels in a different order:
1 Press the v or V button to select the programme
number with the channel (TV Broadcast) you wish
to move. Press the
b button.
2 Press the v or V button to select the new
programme number position for your selected channel
(TV Broadcast). Press the
OK button to store
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
8
Press the MENU button to remove the menu from the screen
Auto tuning
Programmes found:
No channel found.
Please connect aerial
Confirm
Programme Sorting
Exit:
MENU
01
02
03
04
05
06
07
08
09
10
11
TVE
TVE2
TV3
C33
C27
C58
S02
S06
C44
C47
C48
Programme Sorting
Exit:
MENU
01
02
03
04
05
06
07
08
09
10
11
TVE
TVE2
TV3
C33
C27
C58
S02
S06
C44
C47
C48
01 TVE
Do you want to start
automatic tuning?
Ye s No
Your TV set is now ready for use
TV Functions
Introducing and Using the Menu System
Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons
on the Remote Control to operate the menu system:
1
To switch on the menu screens:
Press the
MENU button to switch the first level menu on.
Picture Adjustment
Picture Mode
Contrast
Brightness
Colour
Sharpness
Backlight
Reset
Noise Reduction
Colour Tone
Select: Set:
OK
End:
MENU
Personal
80
50
50
50
70
Auto
Normal
2
To navigate through the menus:
To highlight and select the desired menu or option, press
v or V.
To enter the selected menu or option, press
b.
To return to the last menu or option, press
B.
To alter the settings of your selected option, press
v/V/B or b.
To confirm and store your selection, press
OK.
3
To switch off the menu screens:
Press the
MENU button to remove the menu from the screen.