Sony KP-57WV600 Projection Television User Manual


 
34
SETUP SETUP SETUPSETUP SetupSETUP
Satellite Receiver
and VCR
To connect a satellite receiver and VCR
1 Connect the satellite antenna cable to the satellite receivers
satellite input jack.
2 Connect the CATV cable to the VCRs VHF/UHF input jack.
3 Use a coaxial cable to connect the VCRs VHF/UHF output jack
to the TVs VHF/UHF jack.
4 Use an A/V cable to connect the satellite receivers A/V output
jacks to the VCRs A/V input jacks.
5 Use an A/V cable to connect the VCRs A/V output jacks to the
TVs A/V input jacks.
6 Run the Auto Setup program, as described in Setting Up the
Channel List on page 43.
Using
S VIDEO jacks?
See page 25.
A/V cable
Coaxial
cable
cable
Satellite antenna
cable
CATV
A/V cable
TV
VCR
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
DA4X.book Page 34 Tuesday, April 23, 2002 2:48 PM