Filter
Top Products
44
SETUP SETUP SETUPSETUP SetupSETUP
Adjusting the Convergence Automatically (Flash Focus)
The projection tube image appears on the screen in three colors (red,
green and blue). If they do not converge, the color is poor and the
picture blurs. Before you use your TV, be sure to adjust the
convergence. The Flash Focus feature allows you to adjust the
convergence automatically.
1 Tune to a TV or cable TV program.
2 Press the FLASH FOCUS button on the front panel of the TV (see
pages 14-15).
The cross pattern appears and Flash Focus begins to work.
The adjustment is completed when the TV picture returns.
To Obtain Optimum Convergence
Whenever you find that the picture blurs, press FLASH FOCUS.
To Perform Additional Fine Manual Adjustments
❑
Use the Convergence feature, described on page 45.
✍ It is recommended that you perform Flash Focus about 30 minutes after the
TV is first turned on.
✍ You cannot perform any other functions until Flash Focus has completed its
cycle. If you perform any other operation while Flash Focus is in progress,
the Flash Focus operation is canceled.
You can also access Flash
Focus in the Setup menu. For
details, see page 85.
z
to come
,
DA4X.book Page 44 Tuesday, April 23, 2002 2:48 PM