Filter
Top Products
14
GB
Overview of the TV buttons and indicators
1 PROG +/-/ /
• In TV mode: Selects the next (+) or previous
(-) channel.
• In TV menu: Moves through the options up
( ) or down ( ).
2 2 +/-/ /
• In TV mode: Increases (+) or decreases (-) the
volume.
• In TV menu: Moves through the options right
( ) or left ( ).
3 / – Input select/OK
• In TV mode (page 18): Selects the input
source from equipment connected to the TV
jacks.
• In TV menu: Selects the menu or option, and
confirms the setting.
4 (page 20)
5 1 – On/standby indicator
Flashes in green when the light source is
preparing to turn on. Lights up in green when the
TV is switched on.
Lights up in red when the TV is in standby mode.
If the lamp cover or the lamp itself is not securely
attached, the red indicator will continue to flash
in intervals of three blinks at a time (page 41).
6 – Timer indicator
Lights up in orange when the timer is set
(page 28).
7 – Lamp indicator
Flashes in red when the lamp for the light source
has burned out.
8 Remote control sensor
• Receives IR signals from the remote.
• Do not put anything over the sensor, as its
function may be affected.
9 1 – Power
Switches the TV on or off.
Note
Make sure that the TV is completely switched off before
unplugging the AC power cord. Unplugging the AC
power cord while the TV is turned on may cause the
indicator to remain lit or may cause the TV to
malfunction.
KS-60R200A/50R200A KS-70R200A