Sony KS-50R200A Projection Television User Manual


 
8
GB
5: Auto tuning the TV
The TV will search for and store all available TV
channels.
1 Press G/g to select “OK”, then press .
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No channels were found. Check the antenna
connection and press G/g to select “Yes”, then
press to start auto-tuning again.
2 When the Program Sorting menu appears
on the screen, follow the steps of “Program
Sorting” (page 31).
If you do not change the order in which the channels
are stored on the TV, go to step 3.
3 Press MENU to display the Clock Set
menu.
4 Press F/f/G/g to set the day and time
(hour and minute), then press .
5 Press MENU to exit.
The TV has now tuned in all the available channels.
6 PressG/g to select the desired setting in
“Display this menu next time ?” dialog, then
press to exit.
Tip
If Yes is selected and the TV is switched off by pressing 1
on the TV, or is disconnected from the AC power outlet, the
auto startup procedure restarts the next time the TV is
switched on.
3,5
1,4,6
1,4,6